What is the first check for this task?

Record the exact scanner model and serial. This first check matters because the rest of the workflow assumes the correct item, information and starting condition.

What result should be written down?

Record the result of “Keep the old battery isolated for an approved recycling route.” together with the exact item or batch, relevant settings and any photograph or measurement that another person would need to repeat the decision.

What ratings are on the DV2027 pack?

The oliadeo DV2027 pack is labelled 3.85 V DC, 11600 mAh / 44.66 Wh, 4.4 V limited charge voltage. It fits Autel MS906 Pro and MK906 Pro tablets when the old pack is marked DV2027. Match the label and ribbon before you fit it.

What is an immediate stop signal?

Buying by capacity alone. is one avoidable failure. Also stop whenever lithium batteries can cause fire or injury if punctured, crushed, shorted, incorrectly charged or fitted to an incompatible device. Stop if a pack is swollen, hot or damaged and use an appropriate UK battery/WEEE route.

DV2027 Battery Compatibility Checklist for Autel Scanners

Match the old pack label to DV2027 before you order. Fits Autel MS906 Pro and MK906 Pro tablets.

By ToolsEquip2026-08-16

oliadeo DV2027 pack label on a replacement Autel tablet battery

Open the tablet, read the old pack, and only then order. The oliadeo DV2027 pack is a labelled swap for Autel MaxiSYS MS906 Pro and MaxiCOM MK906 Pro tablets. If the installed pack does not say DV2027, stop.

What to match on the old pack

Photograph the label before you unplug anything. You want the model line to read DV2027. The oliadeo replacement is also marked 1ICP5/57/70-4, rechargeable Li-ion polymer, 3.85 V DC nominal, 4.4 V limited charge voltage, 11600 mAh / 44.66 Wh.

Family names help you find the right aisle, they do not replace the label. MS906 Pro and MK906 Pro both appear on the fit list, but only when the worn pack is a DV2027.

Tablets this pack is for

Autel MaxiSYS MS906 Pro and MS906 Pro-TS
Autel MaxiCOM MK906 Pro, MK906 Pro-TS, MK906S PRO and MK906S PRO-TS

If your tablet is on that list and the old pack says DV2027, continue to the oliadeo DV2027 product page. For the MaxiSYS-only walkthrough see oliadeo DV2027 for Autel MaxiSYS MS906 Pro; for MaxiCOM see oliadeo DV2027 for Autel MaxiCOM MK906 Pro.

Connector and ribbon

The pack uses a flex ribbon connector. Note which way the ribbon sits, then unplug it. The new DV2027 seats the same way. Press the ribbon fully home. A loose ribbon is the usual reason the tablet does not see the pack after a swap.

Checklist before you click buy

Old pack labelled DV2027
Tablet is one of the MaxiSYS MS906 Pro or MaxiCOM MK906 Pro variants above
You can open the back cover and handle the ribbon with the tablet powered off
You will charge on the tablet’s Autel 12 V supply — there is no charger in the box

What arrives in the box

One DV2027 battery, an anti-static bag and foam. No charger. After the cover is back on, charge through the tablet before the first job.

If the label does not say DV2027

Do not force-fit this pack. A different Autel tablet battery uses a different label and often a different ribbon. Come back to this checklist only when you have a DV2027 in your hands.

Next step on a confirmed DV2027 is how to fit an oliadeo DV2027 pack.